User Manual

Administrator’s Guide for SIP-T2xP and SIP-T19P IP Phones
334
play a warning tone to alert you before
answering the intercom call.
Format
Boolean
Default Value
1
Range
Valid values are:
0-Disabled
1-Enabled
Example
features.intercom.tone = 1
Parameter-
features.intercom.barge
Configuration File
<y0000000000xx>.cfg
Description
Enables or disables the IP phone to
automatically answer an incoming intercom
call while there is already an active call on
the IP phone.
If it is set to 0 (Disabled), the IP phone will
handle an incoming intercom call like a
waiting call while there is already an active
call on the IP phone.
If it is set to 1 (Enabled), the IP phone will
automatically answer the intercom call while
there is already an active call on the IP phone
and place the active call on hold.
Format
Boolean
Default Value
0
Range
Valid values are:
0-Disabled
1-Enabled
Example
features.intercom.barge = 1
Parameter-
features.alert_info_tone
Configuration File
<y0000000000xx>.cfg
Description
Enables and disables the IP phone to map
the keywords in the Alert-info header to the
specified Bellcore ring tones.