User Manual

Administrator’s Guide for SIP-T2xP and SIP-T19P IP Phones
326
Note: It is not applicable to SIP-T19P IP
phones.
Format
Boolean
Default Value
0
Range
Valid values are:
0-Disabled
1-Enabled
Example
account.1.dialoginfo_callpickup = 1
Parameter-
wui.http_enable
Configuration File
<y0000000000xx>.cfg
Description
Enables or disables the IP phone to access its
web user interface using HTTP protocol.
Note: If you change this parameter, the IP
phone will reboot to make the change take
effect.
Format
Boolean
Default Value
1
Range
Valid values are:
0-Disabled
1-Enabled
Example
wui.http_enable = 1
Parameter-
network.port.http
Configuration File
<y0000000000xx>.cfg
Description
Configures the HTTP port used to access the
web user interface of the IP phone.
The default HTTP port is 80.
Note: If you change this parameter, the IP
phone will reboot to make the change take
effect.
Format
Integer
Default Value
80