User Manual

Appendix
299
Example
features.call_completion_enable = 1
Parameter-
account.X.anonymous_call
Configuration File
<MAC>.cfg
Description
Enables or disables anonymous call feature for
account X.
If it is set to 1 (Enabled), the IP phone will block
its identity from showing up to the callee when
placing a call. The callee’s phone LCD screen
presents anonymous instead of the caller’s
identity.
X ranges from 1 to 6.
Format
Boolean
Default Value
0
Range
Valid values are:
0-Disabled
1-Enabled
Example
account.1.anonymous_call = 1
Parameter-
account.X.send_anonymous_co
de
Configuration File
<MAC>.cfg
Description
Configures the phone to send anonymous
on/off code to activate/deactivate the
server-side anonymous call feature for
account X.
If it is set to 0 (Off Code), the IP phone will send
anonymous off code to deactivate the
server-side anonymous call feature.
If it is set to 1 (On Code), the IP phone will send
anonymous on code to activate the
server-side anonymous call feature.
X ranges from 1 to 6.
Format
Boolean
Default Value
0