User Manual

Appendix
291
If it is set to 0 (Disabled), neither “#” nor “*”
can be used as a send key.
If it is set to 1 (# key), the pound key is used as
the send key.
If it is set to 2 (* key), the asterisk key is used as
the send key.
Format
Integer
Default Value
1
Range
Valid values are:
0-Disabled
1-# key
2-* key
Example
features.key_as_send = 1
Parameter-
features.key_tone
Configuration File
<y0000000000xx>.cfg
Description
Enables or disables the IP phone to play a
tone when a user presses a key.
If it is set to 1 (Enabled), the IP phone will play
a tone when a user presses a key.
Format
Boolean
Default Value
1
Range
0-Disabled
1-Enabled
Example
features.key_tone = 1
Parameter-
features.send_key_tone
Configuration File
<y0000000000xx>.cfg
Description
Enables or disables the IP phone to play a
tone when a user presses a send key.
If it is set to 1 (Enabled), the IP phone will play
a tone when a user presses a send key.
Note: It works only if the parameter
“features.key_tone” is set to 1 (Enabled).
Format
Boolean
Default Value
1