User Manual

Appendix
279
administrator password.
Note: IP phones support ASCII characters
32-126(0x20-0x7E) only in passwords.
Format
administrator username:new password
Default Value
admin
Range
String within 32 characters
Example
security.user_password = admin:password000
Parameter-
phone_setting.lock
Configuration File
<y0000000000xx>.cfg
Description
Configures the type of phone lock.
Menu Key: The Menu soft key and MESSAGE
key are locked (For SIP-T20P, the MENU key is
locked).
Function Keys: MESSAGE, RD, CONF, HOLD,
MUTE, TRAN, OK, X, navigation keys, soft keys,
line keys and memory keys are locked (For
SIP-T22P/T21P, CONF, HOLD, MUTE and
memory keys do not exist; For SIP-T20P, the
MUTE key, soft keys and memory keys do not
exist, but the additional MENU and Directory
keys are locked; For SIP-T19P, CONF, HOLD, OK,
X, memory keys and line keys do not exist, but
the additional √ key is locked).
All Keys: All keys are locked except the volume
key. You are only allowed to dial emergency
numbers, reject incoming calls by pressing the
X key, answer incoming calls by lifting the
handset, pressing the Speakerphone key, the
HEADSET key or the OK key, place an active
call on hold by pressing the Hold soft key or
the HOLD key, resume the held call by
pressing the Resume soft key or the HOLD key,
and end the call by hanging up the handset,
pressing the Speakerphone key or pressing
the X key (For SIP-T22P/T21P, HOLD key does
not exist; For SIP-T20P, soft keys do not exist. For
SIP-T19P, HOLD and X keys do not exist).