User Manual

Administrator’s Guide for SIP-T2xP and SIP-T19P IP Phones
270
Parameter-
dialplan.replace.line_id.X
Configuration File
<y0000000000xx>.cfg
Description
Configures the desired line to apply this
replace rule. The digit 0 stands for all lines.
X ranges from 1 to 100.
Note: Multiple line IDs are separated by
commas. It is not applicable to SIP-T19P IP
phones.
Format
Integer
Default Value
Blank (for all lines)
Range
Valid values are:
0 to 6 (for SIP-T28P)
0 to 3 (for SIP-T26P/T22P)
0 to 2 (for SIP-T21P/T20P)
Example
dialplan.replace.line_id.1 = 1,2
Dial-now
Parameter-
dialplan.dialnow.rule.X
Configuration File
<y0000000000xx>.cfg
Description
Configures the string used to match the
numbers entered by the user.
When entered numbers match the predefined
dial-now rule, the IP phone will automatically
dial out the numbers without pressing the send
key.
X ranges from 1 to 100.
Format
String
Default Value
Blank
Range
String within 511 characters
Example
dialplan.dialnow.rule.1 = 123
Parameter-
dialplan.dialnow.line_id.X
Configuration File
<y0000000000xx>.cfg
Description
Configures the desired line to apply this
dial-now rule. The digit 0 stands for all lines.
X ranges from 1 to 100.
Note: Multiple line IDs are separated by