User Manual

Appendix
267
Note: If you change this parameter, the IP
phone will reboot to make the change take
effect. It is not applicable to SIP-T19P and
SIP-T21P IP phones. SIP-T19P and SIP-T21P IP
phones only support bridge mode for PC
connection.
Format
Integer
Default Value
1
Range
Valid values are:
0-Router
1-Bridge
Example
network.bridge_mode = 1
Parameter-
network.pc_port.ip
Configuration File
<y0000000000xx>.cfg
Description
Configures the IP address for the PC port when
the PC port is configured as Router.
Note: If you change this parameter, the IP
phone will reboot to make the change take
effect. It is not applicable to SIP-T19P and
SIP-T21P IP phones.
Format
IP Address
Default Value
10.0.0.1
Range
Not Applicable
Example
network.pc_port.ip = 10.0.0.1
Parameter-
network.pc_port.mask
Configuration File
<y0000000000xx>.cfg
Description
Configures the subnet mask for the PC port
when the PC port is configured as Router.
Note: If you change this parameter, the IP
phone will reboot to make the change take
effect. It is not applicable to SIP-T19P and
SIP-T21P IP phones.
Format
IP Address
Default Value
255.255.255.0
Range
Not Applicable