User Manual

Administrator’s Guide for SIP-T2xP and SIP-T19P IP Phones
264
effect.
Format
IPv4 Address
Default Value
Blank
Range
Not Applicable
Example
network.secondary_dns = 202.101.103.54
Parameter-
network.internet_port.type
Configuration File
<MAC>.cfg
Description
Configures the Internet port type.
Note: If you change this parameter, the IP
phone will reboot to make the change take
effect.
Format
Integer
Default Value
0
Range
Valid values are:
0-DHCP
1-PPPoE
2-Static IP Address
Example
network.internet_port.type= 1
Parameter-
network.pppoe.user
Configuration File
<y0000000000xx>.cfg
Description
Configures the PPPoE user name when the
Internet port type is configured as PPPoE and
the IP address mode is configured as IPv4 or
IPv4&IPv6.
Note: If you change this parameter, the IP
phone will reboot to make the change take
effect.
Format
String
Default Value
Blank
Range
String within 32 characters
Example
network.pppoe.user = xmyealink