User Manual

Administrator’s Guide for SIP-T2xP and SIP-T19P IP Phones
242
2. Select the desired level from the pull-down list of System Log Level.
3. Click Confirm to accept the change.
A dialog box pops up to prompt “Do you want to restart your machine?”. The
configuration will take effect after a reboot.
4. Click OK to reboot the IP phone.
After a reboot, the system log level is set as 6, the administrator debug level.
Note
To configure the phone to export the system log to a syslog server via web user
interface:
1. Click on Settings->Configuration.
2. Mark the Server radio box in the Export System Log field.
3. Enter the IP address or domain name of the syslog server in the Server Name field.
Administrator level debugging may make some sensitive information accessible (e.g.,
password-dial number), we recommend that you reset the system log level to 3 after
having the syslog file provided.