User Manual

Upgrading Firmware
227
For more information, refer to
Upgrading Firmware on page
389.
Local
Web User Interface
Configure the way for the IP
phone to check for
configuration files.
Navigate to:
http://<phoneIPAddress>/servl
et?p=settings-autop&q=load
To configure the way for the IP phone to check for new configuration files via web user
interface:
1. Click on Settings->Auto Provision.
2. Make the desired change.
3. Click Confirm to accept the change.
When the “Power On” is set to On, the IP phone will check configuration files stored on
the provisioning server during startup and then will download firmware from the server.