User Manual

Administrator’s Guide for SIP-T2xP and SIP-T19P IP Phones
156
will be automatically ignored. If the parameter is the priority value, the incoming
multicast paging calls with higher priority are automatically answered and the ones
with lower priority are ignored.
Paging Priority Active
This parameter decides how the IP phone handles the incoming multicast paging calls
when there is already a multicast paging call in progress. If the parameter is configured
as disabled, the IP phone will automatically ignore all incoming multicast paging calls. If
the parameter is configured as enabled, an incoming multicast paging call with higher
priority is automatically answered, and the one with lower priority is ignored.
Procedure
Configuration changes can be performed using the configuration files or locally.
Configuration File
<y0000000000xx>.cfg
Configure the listening multicast
address.
Configure Paging Barge and
Paging Priority Active features.
For more information, refer to
Receiving RTP Stream on page
352.
Local
Web User Interface
Configure the listening multicast
address.
Configure Paging Barge and
Paging Priority Active features.
Navigate to:
http://<phoneIPAddress>/servlet
?p=contacts-multicastIP&q=load
To configure a listening multicast address via web user interface:
1. Click on Directory->Multicast IP.
2. Enter the listening multicast address and port number in the Listening Address field.
1 is the highest priority and 10 is the lowest priority.