User Manual

Configuring Basic Features

123

Local

Web User Interface

Configure the method of

transmitting DTMF digits and

the payload type.

Navigate to:

http://<phoneIPAddress>/servl

et?p=account-adv&q=load&ac

c=0

Configure the number of times

for the IP phone to send the end

RTP Event packet.

Navigate to:

http://<phoneIPAddress>/servl

et?p=features-general&q=loa

To configure the method of transmitting DTMF digits via web user interface:

1. Click on Account.

2. Select the desired account from the pull-down list of Account.

3. Click on Advanced.

4. Select the desired value from the pull-down list of DTMF Type.

5. If SIP INFO or AUTO or SIP INFO is selected, select the desired value from the

pull-down list of DTMF Info Type.

6. Enter the desired value in the DTMF Payload Type (96~127) field.