User Manual

Administrator’s Guide for SIP-T2xP and SIP-T19P IP Phones

3. Enter the desired time in the Play Hold Tone Delay field.

4. Click Confirm to accept the change.

Call forward allows users to redirect an incoming call to a third party. IP phones redirect

an incoming INVITE message by responding with a 302 Moved Temporarily message,

which contains a Contact header with a new URI that should be tried. Three types of call

forward:

 Always Forward -- Forward the incoming call immediately.

 Busy Forward -- Forward the incoming call when the callee is busy.

 No Answer Forward -- Forward the incoming call after a period of ring time.

Call forward can be configured on a phone or a per-line basis depending on the call

forward mode. The following describes the call forward modes:

 Phone (default): Call forward feature is effective for the IP phone.

 Custom: Call forward feature can be configured for each or all accounts.

The call forward on code and call forward off code configured on IP phones are used to

activate/deactivate the server-side call forward feature. They may vary on different

servers.

Forward International

Forward international allows users to forward an incoming call to an international

telephone number. This feature is enabled by default.