User Manual

2.2 Driver Installation

To evaluate and develop the X2 under Windows, the serial port driver of the USB adapter

board. The USB adapter board need to be installed of this kit adopts CP2102 chip to realize serial

port (UART) to USB signal conversion. Its driver can be downloaded from our official website or

downloaded from the official website of Silicon Labs.

https://www.ydlidar.com/dowfile.html?id=97

http://cn.silabs.com/products/development-tools/software/usb-to-uart-bridge-vcp-drivers

After unzip the driver package, run the CP2102's Windows driver installation file (exe file

under CP210x_VCP_Windows). Please select the 32-bit version (x86) or 64-bit version (x64)

installation program according to the version of the windows operating system.

FIG 5 YDLIDAR X2 DRIVER VERSION SELECTION

Double-click the exe file and follow the prompts to install it.

FIG 6 YDLIDAR X2 DRIVER INSTALLING

After the installation is complete, right-click on [My Computer] and select [Properties]. On the

open [System] screen, select [Device Manager] from the left menu to access the [Device Manager].