User Manual

www.ydlidar.com Copyright 2015-2018 YDLIDAR Team
7 / 14
FIG 8 YDLIDAR F4PRO EVALUATION SOFTWARE DESCRIPTION
Note: Lidar does not turn on power protection by default. This function requires continuous sending of
scanning commands for the laser radar to work properly. If you stop sending the scan frequency, Lidar will stop
scanning. At present, F4PRO and F4 are compatible with this function, and X4 is not compatible.
FIG 9 CLIENT SOFTWARE INTERFACE
START SCANNING
FIG 10 SCANNING POINT CLOUD DISPLAY