User's Manual

It is recommended that you install the Client Manager after the drivers are installed.

Warning: If you have previously installed any ORiNOCO Client Manager, or

ORiNOCO powered WLAN Cards, then the old Client Manager software and

drivers must be completely uninstalled for proper operation of the Emerald USB

Antenna. See Appendix A “Troubleshooting” for how to do this.

To install the Client Manager software, proceed as follows:

1. If you received floppy disks with your Emerald USB Antenna, put the Client

Manager disk into the floppy drive and from the Windows Start menu, select

Run, and type a:\cl_mgr.exe.

2. If you received a CD with your Emerald USB Antenna, put it into the CD-ROM

drive and go to Start -> Run and type d:\Client Manager\cl_mgr.exe. Or

use the Windows Explorer to locate the file on the CD, and double click to run it.

3. Cl_mgr is a self-extracting zip file. It will use the c:\windows\temp directory to

uncompress the setup files. It will then automatically launch the setup wizard to

install the Client Manager. Use all the default directories under most

circumstances.