User Manual

Marquee™ Point-to-Point Series User Guide
Section 1
Overview
1.1 Description
The Marquee™ Series is a powerful answer for customers seeking a reliable high-speed wireless
connectivity solution. It provides the best features and wireless reach in the field by combining industry
leading outdoor point-to-point (P-P) optimized software with its patented amplifier technology. Unlike
other single band products, Marquee gives you the choice of installing a license-free 5.8 GHz, or a
licensed 4.9 GHz network. If your needs change in the future, Marquee can change with you.
The Marquee P-P Series is comprised of Marquee Bridges. The Marquee is available in two types of
enclosures: a flat panel (FP) and a ruggedized (EX) enclosure (see Figures 1.1a and b). The FP
enclosure features a 23 dBi integrated antenna. The EX enclosure comes either with a 23 dBi flat panel
antenna attached to the top of the unit, or it has an N-type connector on the rear to plug an external
antenna. Table 1.1 shows the possible combinations of Marquee products, solutions and antennas that
are offered. Refer to Appendix A for Marquee technical specifications.
Table 1.1 – Marquee P-P Series and Antenna Combinations
Enclosure Type of Marquee Type of Antenna Model Number
1
Ordered separately
MPP49SEXN
MPP49HEXN
FP Attached (23 dBi) MPP58HEX23A
Dish 2 ft (28 dBi) MPP58HEX28D
Dish 2.5 ft (31 dBi) MPP58HEX31D
Ruggedized (EX)
2
Bridge
Dish 3 ft (34 dBi) MPP58HEX34D
Flat panel (FP) Bridge FP Integrated (23 dBi) MPP58HFP23I
1 49 = 4.9 GHz S = Standard (Non-Amplified)
58 = 5.8 GHz H = High Power (Amplified)
2
Models with external antennas include one 6 ft LMR-600 coax cable per unit
Version 1.2 Page 1 February 2005