User Manual

Marquee™ Point-to-Point Series User Guide
Figure 2.14 – Enter IP Address Screen
5. appears (Figure 2.15). Verify that you have the partner
Marquee unit displayed in the box, click on it and then click the Link Test button (or double-click the
partner unit). The Remote Test Li 16). The main goal now is to peak
the SNR levels at both ends of the link.
Figure 2.15 – Select a Remote Link Partner Screen
4. Click the Wireless Link Test button. Again, the Enter IP Address window appears. Click OK.
The Select a Remote Link Partner window
nk window is shown (Figure 2.
Version 1.2 Page 12 February 2005