User Manual

Marquee™ Point-to-MultiPoint Series User Guide
Figure 3.3 – Setup Screen Figure 3.4 – Interface Setup Screen
8. Click on the setup button corresponding to the active wireless card (in this case Setup 2). The IEEE
802.11 Setup screen appears. Notice that this screen is slightly different depending on whether you
are configuring a 5.8 GHz radio (Figure 3.5a) or a 4.9 GHz radio (Figure 3.5b).
Figure 3.5a – IEEE 802.11 Interface Setup Screen Figure 3.5b – IEEE 802.11 Interface Setup Screen
for 5.8 GHz Radios for 4.9 GHz Radios
Mode Selection – In a P-MP configuration one unit must be Base and all the others must be
Satellite.
TurboCell Base Station Mode – For the unit that is set up as Base, select Polling Base Station.
This mode is ideal for any TurboCell application, P-P or P-MP. For the unit that is set up as Satellite,
these buttons are grayed out.
Radio Configuration – Select 802.11a for a 5.8 GHz radio. Select Public Safety for a 4.9 GHz
radio.
Version 1.3(a) Page 17 Jul 2005