User Manual

Marquee™ Point-to-MultiPoint Series User Guide
Figure 2.12 – Configurator Main Screen
Local Marquee
Remote Marquee
Figure 2.13 –Enter IP Address Screen
4. The Select a Remote Link Partner window appears (Figure 2.14). Verify that you have the partner
Marquee P-MP unit displayed in the box, click on it and then click the Link Test button (or double-
click the partner unit). The Remote Test Link window is shown (Figure 2.15). The main goal now is to
peak the SNR levels at both ends of the link.
Version 1.3(a) Page 11 Jul 2005