User's Manual

Version 3.0 Page 3 11/01/02
• Ethernet interface. The EtherAnt II connects to an existing Ethernet port on the PC, so
new driver installation is not required as long as a compatible Ethernet port driver is
loaded. Once the EtherAnt II is connected, simply install the Client Manager from the
CD-ROM and configure the network settings.
• 18 dBi Gain Antenna. This high-gain directional antenna provides long-range wireless
connectivity.
• Installation. Part 15 FCC Certification does not require Professional installation
However, someone who is experienced in installing devices outdoors should do the
installation.
• Ideal for Cable/DSL Routers. The EtherAnt II plugs into the WAN port on a client
router to service a LAN.
• 802.11b compliant. The EtherAnt II is WiFi™ compatible and will work with any
certified 802.11b compatible access point or client station. This includes ORiNOCO
Access Points such as the AP500, AP1000, AP2000 and WLAN devices such as the YDI
Diamond WLAN Card and YDI USB Antenna.
• FCC Part 15 certified for license-free operation.
1.3 EtherAnt II Client Adapter Kit
Each EtherAnt II Client Adapter kit includes the following:
• 18 dBi gain Flat panel directional antenna with built-in radio and Ethernet adapter
• Optional integrated bi-directional amplifier for increased transmit power and receive
signal sensitivity for longer range (LR model).
• Ethernet cable with weatherproof antenna connector, (50 feet standard).
• Cat 5 DC Power Injector
• DC Power adapter for 110 VAC
• Sturdy steel wall/mast tilt-bracket mount
• CD-ROM with Client Manager software
• User’s Manual
You can also visit http://www.ydi.com/support/downloads.php for the latest software and Users’
Manual.