User's Manual

Version 3.0 Page 2 11/01/02
The Windows-based Client Manager provides configuration and diagnostic utilities that allow
you to see vital information regarding the link between the antenna and the base station.
Information such as signal-to-noise ratio, signal strength, and noise level all in dB, provides for
efficient installation and aiming of the antenna, as well as troubleshooting link problems.
The EtherAnt II kit includes a 50-foot outdoor-rated Ethernet cable with a weatherproof
connector (longer cables are available as on option). By using RJ-45 in-line couplers, you can
extend the cable up to 300 feet to connect the EtherAnt II to your network. The WLAN device
located in the antenna gets its power from the DC Power Injector which puts DC power onto the
Ethernet cable.
The EtherAnt-LR can operate only with an Ethernet cable up to a maximum length of 100 feet
between the DC Power Injector and the antenna. Both the EtherAnt II and the EtherAnt II-LR
version operate from a 15 VDC power supply. A 110 VAC adapter is included with the
EtherAnt II package, and a 110/220 VAC “laptop-type” adapter is included with the EtherAnt II-
LR package.
CAUTION: Operating the EtherAnt-LR version with more than 15 VDC will damage it.
Operating it with less than 15 VDC will cause improper operation.
1.2 EtherAnt II Client Adapter Features
Key Features
• 802.11b radio, Ethernet Converter and amplifier built into the antenna.
• WiFi™ compatible
• LR models of feature a built-in amplifier and provides the maximum range possible
• Ideal solution for providing Wireless Internet access to distant clients
• Communicates with any WiFi™ compatible Access Point
• Remotely configurable and Manageable based on IP address
• Client Manager shows signal, noise and SNR levels in dB
• Professional installation is not required by FCC Part 15 rules
• Connects directly into PCs without installing device drivers
• Supports direct connection to LANs via built-in Microrouting
• Can be mounted in either vertical or horizontal polarization
• Mounts either to a wall or antenna mast up to 1 3/4 inches in diameter
• DC power for electronics in the antenna are carried up the Ethernet cable
• Flat panel antenna offers 18 dbi gain and 15 beamwidth
• Up to 4.5 Mbps actual throughput
• Transmit power of 2 Watts EIRP and 16 Watts EIRP on –LR model
• FCC Part 15 Certified for license-free operation - 11 channels (USA)
• Antenna is only one inch thick and 14 inches square
• Outdoor rated category 5 Ethernet cable provided (50 feet standard)
• Weatherproof: Designed and rated for outdoor use
• Operating range: -20 C to +50 C