User Manual Part 2

Link CX-24 User’s Manual
Version 1.0 Page 44 February 2004
1. Set elLogEntryNumber to start at the oldest entry 0.
2. Set elScrollControl to forward to read log in FORWARD direction – oldest entries first.
3. Get elTrapTable retrieves the most recent ten entries – repeat for next ten entries.
The following SNMP operations also can be used to access or modify information in the error log:
To read the log in the BACKWARDS direction, set elScrollControl to backward.
To clear the log, set elScrollControl to clearLog.
To set the threshold for the lowest severity of messages to be generated, set elLevelDisable to 1
(normal) through 5 (critical). Setting the threshold properly avoids filling the log with informational
or non-serious errors.
To set the current date and time (default after reboot is 12 Midnight, January 1, 1970), set the
appropriate fields of elTimeDate, or use the Control page on the UI. The timestamps included in
error messages are generated relative to this date and time.