HONOR MagicWatch 2 Quick Start Guide HBE-B19
Note: This product is not designed to be a medical device, and is not intended to diagnose, treat, cure or prevent any disease. All data and measurements should be used for personal reference only. If you experience skin discomfort when wearing the device, take it off and consult a doctor. The charging dock is not water resistant. Wipe the port, metal contacts, and the device dry during charging. Contents Quick Start Guide ....................................................
Quick Start Guide 1. Charging Connect the watch to the charging cable, as shown in the following figure. Align and attach the charging port to the magnets of the charging cradle. The battery level will be displayed on the screen. Up button Press and hold the up button to power on, power off, or restart the watch. Down button Heart rate sensor Charging port • Wipe the charging port dry before charging. • Use the dedicated charging cable that comes with your watch to charge it. 2.
Copyright © Huawei Technologies Co., Ltd. 2019. All rights reserved. THIS DOCUMENT IS FOR INFORMATION PURPOSE ONLY, AND DOES NOT CONSTITUTE ANY KIND OF WARRANTIES. Trademarks and Permissions , , Technologies Co., Ltd. , and are trademarks or registered trademarks of Huawei The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Huawei Technologies Co., Ltd. is under license.
• Ideal temperatures are -20°C to +45°C. • Some wireless devices may affect the performance of hearing aids or pacemakers. Consult your service provider for more information. • Pacemaker manufacturers recommend that a minimum distance of 15 cm be maintained between a device and a pacemaker to prevent potential interference with the pacemaker. If using a pacemaker, hold the device on the side opposite the pacemaker and do not carry the device in your front pocket.
and consult a doctor. • When charging the device, make sure the power adapter is plugged into a socket near the devices and is easily accessible. • Unplug the charger from electrical outlets and the device when not in use.
RF exposure requirements Important safety information regarding radio frequency (RF) radiation exposure: RF exposure guidelines require that the device should be used for wrist worn only. Failure to observe this guideline may result in RF exposure exceeding limits. Statement Hereby, Huawei Technologies Co., Ltd. declares that this device HBE-B19 is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU.
It is recommended that the following accessories should be used: Charging dock: AF39-1 Charging cable The product software version is HBE-B19: 1.0.0.12 Software updates will be released by the manufacturer to fix bugs or enhance functions after the product has been released. All software versions released by the manufacturer have been verified and are still compliant with the related rules.
For further information, log on to: Huawei E-waste Policy: http://consumer.huawei.com/in/support/e-waste-process-policy/. Official Recycling Partner: Reteck Envirotech Private Limited. Plot-4A, Sanghi Udyog, Near Navade Railway Station, Tal-Panvel, Dist. - Raigad, Taloja MIDC-410208. info@reteck.in www.reteck.in / www.reteck.
IC Statement This device complies with CAN ICES-3 (B)/NMB-3(B). This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Déclaration de l'IC Cet appareil est conforme à la norme CAN ICES-3 (B)/NMB-3(B).
د 96726110_01
