Daim Ntawv Qhia Tus Neeg Siv
Table Of Contents
- Know Your Device
- Before using the device, familiarize yourself with its basic operations.
- •To power on your device, press and hold the power button until the screen turns on.•To power off your device, press and hold the power button, and then touch .•To restart your device, press and hold the power button, and then touch .•Press and hold the Power and Volume down buttons for more than 10 seconds to force restart your device.
- Volume buttonPower button/Fingerprint sensorUSB Type-C port/Headset jackCard slot
- Getting Started
- •Be careful not to scratch your device or hurt yourself when using the eject pin.•Store the eject pin out of the reach of children to prevent accidental swallowing or injury.•Do not use cut or modified SIM cards with your device as these may not be recognized and could damage the card tray (slot).•If your SIM card does not match your device, please contact your carrier.
- Follow the instructions in the following figures to set up your device. Please use the eject pin included.Ensure that the card is correctly aligned and that the card tray is level when you insert it into your device.
- Single-SIM card:Dual-SIM card:
- SIM Card Management
- For More Information
- If you encounter any problems while using your device, you can obtain help from the following resources:
- •Visit https://www.hihonor.com to view device information and other information.•Visit https://www.hihonor.com/global/support/ for the most up-to-date contact information for your country or region.•Go to Settings and enter the following keywords in the search box to view the corresponding information. E.g. Legal information, Safety information, Authentication info, Regulatory information.•Depending on the region or model, some devices are required to receive approval from the Federal Communications Commission (FCC). If your device is approved by the FCC, you can go to Settings and touch System & updates > Regulatory information to view FCC ID. If your device does not have an FCC ID, the device has not been authorized for sale in the U.S. or its territories and may only be brought to the U.S. for the owner's personal use.
- Safety Information
- Please read all of the safety information carefully before using your device to ensure its safe and proper operation and to learn how to dispose of your device properly.
- Operation and safety
- Disposal and Recycling Information
- Reduction of hazardous substances
- RF Exposure Information
- The World Health Organization has stated that exposure can be reduced by limiting your usage or simply using a hands-free kit to keep the device away from the head and body.Ensure that the device accessories, such as a device case and device holster, are not composed of metal components. Keep the device away from your body to meet the distance requirement.
- For the countries that adopted the SAR limit 2.0 W/kg over 10 grams of tissue.The device complies with RF specifications when used near your ear or at a distance of 0.50 cm from your body.CRT-LX1: The highest reported SAR value: head SAR: XXX W/kg; body SAR: XXX W/kg.CRT-LX2: The highest reported SAR value: head SAR: 1.17 W/kg; body SAR: 1.14 W/kg.
- For the countries that adopted the SAR limit 1.6 W/kg over 1 gram of tissue.The device complies with RF specifications when used near your ear or at a distance of 1.50 cm from your body.CRT-LX3: The highest reported SAR value: head SAR: XXX W/kg; body SAR: XXX W/kg; hotspot SAR: XXX W/kg.
- EU Regulatory Compliance (only applies to CRT-LX1 / CRT-LX2)
- StatementHereby, Honor Device Co., Ltd. declares that this device CRT-LX1 / CRT-LX2 is in compliance with the following Directive: RED 2014/53/EU, RoHS 2011/65/EU, ErP 2009/125/EC.The full text of the EU declaration of conformity, the detailed ErP information and most recent information about accessories & software are available at the following internet address: https://www.hihonor.com/global/legal/certification/.This device may be operated in all member states of the EU.Observe national and local regulations where the device is used.This device may be restricted for use, depending on the local network.
- Restrictions in the 5 GHz band:The 5150 to 5350 MHz frequency range is restricted to indoor use only in: AT, BE, BG, CH, CY, CZ, DE, DK, EE, EL, ES, FI, FR, HR, HU, IE, IS, IT, LI, LT, LU, LV, MT, NL, NO, PL, PT, RO, SE, SI, SK, TR, UK(NI).
- Frequency Bands and Power
- FCC statement
- Legal Notice
- A
CRT-LX1 GSM900: 35.5dBm, GSM1800: 32.5dBm,
WCDMA900/2100: 25.7dBm, LTE Band
1/3/7/8/20/28: 25.7dBm, Bluetooth 2.4GHz:
20dBm, Wi-Fi 2.4GHz: 20dBm, Wi-Fi 5G:
5150-5250MHz: 23dBm, 5250-5350MHz:
23dBm, 5470-5725MHz: 23dBm,
5725-5850MHz: 14dBm, NFC 13.56MHz: 42
dBμA/m @ 10m
CRT-LX2 GSM900: 35.5dBm, GSM1800: 32.5dBm,
WCDMA900/2100: 25.7dBm, LTE Band
1/3/7/8/20/28/38/40: 25.7dBm, Bluetooth
2.4GHz: 20dBm, Wi-Fi 2.4GHz: 20dBm, Wi-
Fi 5G: 5150-5250MHz: 23dBm,
5250-5350MHz: 23dBm, 5470-5725MHz:
23dBm, 5725-5850MHz: 14dBm
FCC statement
This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to Part
15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation. This equipment generates, uses
and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions,
may cause harmful interference to radio communications.
However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does
cause harmful interference to radio or television
reception, which can be determined by turning the
equipment o and on, the user is encouraged to try to
correct the interference by one or more of the following
measures:
--Reorient or relocate the receiving antenna.
--Increase the separation between the equipment and
receiver.
--Connect the equipment into an outlet on a circuit
dierent from that to which the receiver is connected.
--Consult the dealer or an experienced radio/TV
technician for help.
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1)
this device may not cause harmful interference, and (2)
this device must accept any interference received,
including interference that may cause undesired
operation.
7