Instruction manual

96
4 Data setting error 1 : Error
5 Multi-function output 1 (1 : MA ON 0 : MA OFF)
6 Multi-function output 2 (1 : P1 ON 0 : OFF)
7 Multi-function output 3 (1 : P2 ON 0 : OFF)
Register No. bit
0020H
0021H
Status signalFault descriptionData link status
0022H
0 Run command 1 : Run 0 : Stop
1 Reverse run 1 : Reverse run 0 : Forward run
1 : Ready
1 : Fault
0 : Not ready2 Inverter operation ready
3 Fault
8 - F (Not used)
0 Overcurrent (OC)
1 Overvoltage (OV)
2 Inverter overload (OL2)
3 Inverter overheat (OH)
4 (Not used)
5 (Not used)
6 PID feedback loss (FbL)
7 External fault (EF, EFO) Emergency stop (STP)
8 Hardware fault (F××)
9 Motor overload (OL1)
A Overtorque detection (OL3)
B Undertorque detection (UL3)
C Power loss (UV1)
D Control power fault (UV2)
E MEMOBUS communications timeover (CE)
F Operator connection (OPR)
0 Data write in
1 (Not used)
2 (Not used)
3 Upper / lower limit fault
4 Consistency fault
5 - F (Not used)
Description
0023H Frequency reference (Unit : n152)
0024H
0025H-026H
0027H
0028H
Output frequency (Unit : n152)
(Not used)
Output current (10/1A)
Output voltage reference (1/1V)
Fault description
0
1
2
3
4-F
(Not used)
(Not used)
Input open phase (PF)
Output open phase (LF)
(Not used)
0029H
• Monitor Data (available only for read out)