Instruction manual

55
Using four accel/decel times
* When “deceleration to a stop” is selected (n005 = 0).
By setting any of the multi-function input selections (n050 to n056) to 11
(acceleration/deceleration time selection (1)) or 27 (acceleration/deceleration time
selection 2), acceleration/deceleration time can be selected by ON/OFF
combinations of acceleration/deceleration time selection (1) and
acceleration/deceleration time selection 2 (terminals S1 to S7).
OUTPUT
FREQUENCY
ACCEL
TIME 1
(n019)
DECEL
TIME 1
(n020)
ACCEL
TIME 2
(n021)
DECEL
TIME 2
(n022)
DECEL
TIME 3*
(n042)
DECEL
TIME 4*
(n044)
ACCEL
TIME 3
(n041)
ACCEL
TIME 4
(n043)
TIME
ON
ON
FORWARD (REVERSE)
RUN COMMAND
MULTI-STEP SPEED
REFERENCE
ACCEL/DECEL TIME
SELECTION(1)
ACCEL/DECEL TIME
SELECTION(2)
ON ON
ON
Name
Unit Setting range Initial setting
10.0s
10.0s
10.0s
10.0s
10.0s
10.0s
10.0s
10.0s
Acceleration time 1
Deceleration time 1
Acceleration time 2
Deceleration time 2
Acceleration time 3
Deceleration time 3
Acceleration time 4
Deceleration time 4
No.
n019
n020
n021
n022
n041
n042
n043
n044
Refer to
n018
setting
Refer to
n018
setting
Depends
on n018
setting.
(See the next
table.)
Depends
on n018
setting.
(See the next
table.)
Acceleration/Deceleration
Time Selection (1)
Acceleration/Deceleration
Time Selection 2
OFF OFF
ON OFF
OFF ON
ON ON
Acceleration Time
Acceleration time 1
(n019)
Acceleration time 2
(n021)
Acceleration time 3
(n041)
Acceleration time 4
(n043)
Deceleration Time
Deceleration time 1
(n020)
Deceleration time 2
(n022)
Deceleration time 3
(n042)
Deceleration time 4
(n044)
The combinations of acceleration/deceleration time selection settings are shown below.