Instruction manual

5
RECEIVING
CAUTION
(Ref. page)
• Do not install or operate any inverter which is damaged or
has missing parts.
Failure to observe this caution may result in personal injury or
equipment damage.
÷÷÷÷÷÷÷÷÷÷÷÷÷÷÷÷÷÷÷÷÷÷÷÷÷÷÷÷÷÷÷÷÷÷÷÷÷÷÷÷16
CAUTION
(Ref. page)
• Lift the cabinet by the cooling fin. When moving the
unit, never lift by the plastic case or the terminal covers.
Otherwise, the main unit may be dropped causing damage
to the unit.
÷÷÷÷÷÷÷÷÷÷÷÷÷÷÷÷÷÷÷÷÷÷÷÷÷÷÷÷÷÷÷÷÷÷÷÷÷÷÷÷÷÷÷÷÷÷20
• Mount the inverter on nonflammable material (i.e. metal).
Failure to observe this caution can result in a fire.
÷÷÷÷÷÷÷÷÷÷÷÷÷÷÷20
• When mounting units in an enclosure, install a fan or
other cooling device to keep the intake air temperature below
50: (122<) for IP20 (open chassis type), or below 40°C
(105°F) for NEMA 1 (TYPE 1), IP20 (Top-closed type).
Overheating may cause a fire or damage to the unit.
÷÷÷÷÷÷÷÷÷÷÷÷÷21
• The VS-606V7 generates heat. For effective cooling,
mount it vertically.
Refer to the figure in “Mounting Dimensions” on page 21.
MOUNTING