Instruction manual

48
 How to select LOCAL/REMOTE modes
When LOCAL/REMOTE
switching function is not
set for multi-function
input selection
When LOCAL/REMOTE
switching function is set
at multi-function input
selection
LOCAL mode REMOTE mode
(When 17 is set to
any of constants
n050 to n056)
(When 17 is not set
to any of constants
n050 to n056)
 Switching LOCAL/REMOTE Modes
The following functions can be selected by switching the LOCAL or
REMOTE mode. To select RUN/STOP commands or frequency
reference, change the mode in advance depending on the following
applications.
• LOCAL mode: Enables the digital operator for RUN/STOP
commands and FWD/REV run commands.
Frequency reference can be set by potentiometer or
.
• REMOTE mode: Enables run command selection (n003).
FREF
Set multi-function
input terminal is
turned OFF.
Set multi-function
input terminal is
turned ON.
Select rE for
operator
selection.
LO/RE
Select Lo for
operator
selection.
LO/RE