Instruction manual

Input / Output terminal status
38
1: Terminal S1 is “closed.”
Input terminal status
1: Terminal S2 is “closed.”
1: Terminal S3 is “closed.”
1: Terminal S4 is “closed.”
1: Terminal S5 is “closed.”
1: Terminal S6 is “closed.”
1: Terminal S7 is “closed.”
Not used
1: Terminal MA-MC is “closed.”
Output terminal status
1: Terminal P1-PC is “closed.”
1: Terminal P2-PC “closed.”
Not used
1: CRC error
Data reception error display
1: Data length fault
Not used
1: Parity error
1: Over run error
1: Framing error
1: Timeover
Not used