Instruction manual

 LED Description
By pressing on the digital operator, each of the function LEDs can be
selected.
The following flowchart describes each function LED.
DSPL
35
If the VS-606V7
loses power while in
one of these modes,
it will return to this
mode once power is
restored.
Power ON
FREF
FOUT
IOUT
MNTR
F/R
DSPL
DSPL
DSPL
DSPL
DSPL
Frequency reference setting/monitor (Hz)
Sets VS-606V7 operation speed.
Output frequency monitor (Hz)
Displays frequency that VS-606V7 is
currently outputting.
Setting disabled.
Output current monitor (A)
Displays current that VS-606V7 is currently
outputting.
Setting disabled.
Multi-function monitor
Description of the selected monitor is
displayed.
(Refer to page 36 for details.)
FWD/REV run selection
Sets the motor rotation direction when
run command is given by the digital operator.
Setting can be changed by or key.
FO (forward run) EV (reverse run)
<
<
Monitor No.
U-01: Frequency reference (FREF)
U-02: Output frequency (FOUT)
U-03: Output current (IOUT)
U-04: Output voltage reference (Unit: 1V)
U-05: DC voltage (Unit: 1V)
U-06: Input terminal status
U-07: Output terminal status
U-08: Torque monitor
U-09: Fault history
U-10: Software No.
U-11: Output power
U-15: Data reception error
U-16: PID feedback
U-17: PID input
U-18: PID output