Instruction manual

ManualsBrandsYASKAWA ManualsConsumer electronicsVS-606V7 Series

161

162

163

164

165

166

167

168

169

170

169

Notes:

4. Changes depending on inverter capacity. Refer to page 67.

5. Initial setting of the model with digital operator JVOP-140 (with potentiometer) is 0.

Setting can be set to 1 by constant initialization.

2. Upper limit of setting range and initial setting are doubled at 400V class.

1. Not initialized by constant initialization.

3. Changes depending on inverter capacity. Refer to the next page.

No.

6. When control mode selection (n002) is changed, initial setting corresponds to the control mode.

* Values are doubled with 400V class.

Name

V / f control mode

(n002 = 0)

Vector control mode

(n002 = 1)

n014 Mid. output frequency 1.3Hz

n015 Mid. output frequency voltage 12.0V*

n016 Min. output frequency 1.3Hz

n017 Min. output frequency voltage 12.0V*

n104 Torque compensation time constant 0.3s

n111 Slip compensation gain 0.0

n112 Slip compensation gain time constant 2.0s

3.0Hz

11.0V*

1.0Hz

4.3V*

0.2s

1.0

0.2s

Changes depending on inverter capacity. Refer to page 101.

No.

< 200V class 3-phase

Name Unit

– Inverter capacity kW 0.1kW 0.25kW 0.55kW 1.1kW 1.5kW 2.2kW – 4.0kW

n036 Motor rated current A 0.6 1.1 1.9 3.3 6.2 8.5 – 14.1

n105

Torque compensation

iron loss

W 1.7 3.4 4.2 6.5 11.1 11.8 – 19

n106 Motor rated slip Hz 2.5 2.6 2.9 2.5 2.6 2.9 – 3.3

n107

Line to neutral

(per phase)*

Ω 17.99 10.28 4.573 2.575 1.233 0.8 – 0.385

n108

Motor leakage inductance

MH 110.4 56.08 42.21 19.07 13.4 9.81 – 6.34

n110 Motor no-load current % 72 73 62 55 45 35 – 32

No.

< 200V class single-phase