Instruction manual

110
Operator potentiometer
FREF1(n024)
External terminal (0 to 10V)
External terminal ( 4 to 20 mA)
External terminal (0 to 20 mA)
Pulse train
Communication
Operator (0 to 10 V)
Operator (4 to 20mA)
FREF1 (n024)
FREF2 (n025) FREF3 (n026) FREF4 (n027)
FREF5 (n028)
FREF6 (n029) FREF7 (n030)
FREF8 (n031) FREF9 (n120)
FREF10 (n121) FREF11 (n122) FREF12 (n123) FREF13 (n124) FREF14 (n125) FREF15 (n126)
FREF16 (n127) FJOG (n032)
n004
Frequency reference selection
Remote/Local
Multi-step speed reference
Operator potentiometer
External terminal (0 to 10V)
External terminal (4 to 20 mA)
External terminal (0 to 20 mA)
Operator (0 to 10 V)
Operator (4 to 20mA)
Pulse train
Adjustment gain
Differential time (D)
PID control selection
Feedback value
Differential time
PID control selection
Integral limit from multi-function input
Integral limit from multi-function input
Integral upper limit
Inregral time(I) compensation with reminder
Proportional gain
PID primary delay time constant compensation with reminder
PID control selection
PID offset adjustment
PID output gain
n128=0 or PID cancel by the multi-function input
n128=1,2,5.6 PID control selection
Output frequency
PID output value
MNTR(U-18) 100%/FMAX
PID Control Block Diagram
n164
INPUT
Notes: Z-1 cannot be cleared during operation command input. Z-1 can be cleared during stop command input, or during PID cancel by the multi-function input.