Instruction manual

104
• Search operation power detection hold width (n161)
When the power fluctuation is less than this value, the output voltage
is held for 3 seconds. Then, the search operation mode is activated.
Set the hold width in % of the power which is currently held.
Constant
No.
n161
Name
Search operation power
detection hold width
Unit
%
Setting
Range
Initial
Setting
100 to 100
• Power detection filter time constant (n162)
Response at load change is improved when this value is small.
However, at low frequency, unstable rotation will result.
Constant
No.
n162
Name
Time constant of power
detection filter
Unit
× 4 ms
Setting
Range
Initial
Setting
5 (20 ms)0 to 255