Instruction manual

6. Operating with DeviceNet Communications
95
Identity Object (Class 01 Hex)
The Identity object stores the DeviceNet product information. All of the
attributes are read-only.
• Supported Services
• Object Contents
Footer This value is set automatically, so there is no need
to check it.
Service
Code
(Hex)
Service Name Description
0E Get_Attribute_
Single
Returns the contents of the specified
attribute.
05 Reset Resets (initializes) the Inverter's
communications status.
In-
stance
At-
tribute
Name Contents Setting
Range
Factory Set-
ting (Hex)
Read Write Size
00 01 Object
Soft-
ware
Revision
Indicates the Iden-
tity object's soft-
ware revision.
--- 0001 OK --- Word
01 01 Vendor
ID
Indicates the man-
ufacturer's code.
• 44 (2C Hex):
Yaskawa Elec-
tric
--- 002C OK --- Word
02 Device
Type
Indicates the De-
viceNet device
profile. This prod-
uct implements
the AC Drive pro-
file.
• 2: AC Drive
--- 0002 OK --- Word
03 Product
Code
Indicates the prod-
uct code as-
signed by the
manufacturer.
(See note 1.)
--- Depends
on prod-
uct.
OK --- Word
04 Revision Indicates the
Inverter's commu-
nications software
revision.
--- 01,01 OK --- Byte x
2
Item Description