Instruction manual

58
n004 Frequency
Reference
Selection
0: Enables the Digital Operator’s
potentiometer setting.
1: Enables Frequency Reference 1
(constant n024).
7: Enables a voltage reference (0 to
10 V) at the Digital Operator’s cir-
cuit terminal.
8: Enables a current reference (4 to
20 mA) at the Digital Operator’s
circuit terminal.
9: Enables DeviceNet
communications.
Set this constant to 9 when setting the
frequency through DeviceNet commu-
nications.
n035 Selecting
Setting/Dis-
play Units of
Frequency
Reference
Always set the number of motor poles
(2 to 39).
In DeviceNet standards, the motor
speed is expressed in units of r/min.
The Inverter uses this constant setting
to convert the frequency to r/min.
Constant
No.
Name Description