Instruction manual

10. Specifications
247
104 0168 Torque Compensation
Time Constant
0.0 to
25.5 s
0.1 s 0.3 s
(Note 8)
131
105 0169 Torque Compensation
Iron Loss
0.0 to 6550 0.01 W (less
than 1000 W)/
1 W (1000 W
or more)
(Note 3) 131
106 016A Motor Rated Slip 0.0 to
20.0 Hz
0.1 Hz (Note 3) 132
107 016B Line to Neutral (per
Phase)
0.000 to
65.50 Ω
0.001 Ω (less
than 10 Ω)/
0.01 Ω (10 Ω
or more)
(Note 3) 132
108 016C Motor Leakage Induc-
tance
0.00 to
655.0 mH
0.01 mH (less
than 100 mH)/
0.1 mH
(100 mH or
more)
(Note 3) 134
109 016D Torque Compensation
Voltage Limiter
0% to
250%
1% 150% ---
110 016E Motor No-load Current 0% to 99% 1% (Note 3) 132
111 016F Slip Compensation Gain 0.0 to 2.5 0.1 0.0 (Note 8) 171
112 0170 Slip Compensation Time
Constant
0.0 to
25.5 s
0.1 s 2.0 s
(Note 8)
171
113 0171 Slip Correction During
Regenerative Operation
0, 1 1 0 133
115 0173 Stall Prevention Auto-
matic Decrease Selec-
tion
0, 1 1 0 169
116 0174 Acceleration/decelera-
tion Time during Stall
Prevention
0, 1 1 0 170
117 0175 Undertorque Detection
Function Selection
0 to 4 1 0 ---
118 0176 Undertorque Detection
Level
0% to
200%
1% 10% ---
119 0177 Undertorque Detection
Time
0.1 to
10.0 s
0.1 s 0.1 s ---
No. Register
No. for
Trans-
mission
Name Setting
Range
Setting Unit Factory
Setting
User
Setting
Ref.
Page