Instruction manual

128
(n016)
For details, refer to Adjusting Torque According to Appli-
cation (V/f Pattern Setting) on page 129.
3. If the following conditions are not satisfied in the jump
frequency settings:
Jump Frequency 3 (n085) ≤ Jump Frequency 2 (n084)
≤ Jump Frequency 1 (n083)
4. If the Frequency Reference Lower Limit (n034) ≤ Fre-
quency Reference Upper Limit (n033)
5. If the Motor Rated Current (n036) ≤ 150% of Inverter
rated current
6. If constant n018 is set to 1 (Acceleration/Deceleration
Time Unit is 0.01 s) when n018 is set to 0 and a value
exceeding 600.0 s is set for an Acceleration/Deceleration
Time (n019 to n022)