Instruction manual

7. Programming Features

127

7. Programming Features

Factory settings of the constants are shaded in the tables.

 Constant Setup and Initialization

 Constant Selection/Initialization (n001)

The following table lists the data that can be set or read when n001 is

set. Unused constants between n001 and n179 are not displayed.

* 1. Excluding setting-disabled constants.

* 2. Refer to page 159.

appears on the display for one second and the set data

returns to its initial values in the following cases.

1. If the set values of Multi-function Input Selections 1 to 7

(n050 to n056) are the same

2. If the following conditions are not satisfied in the V/f pat-

tern setting:

Max. Output Frequency (n011) ≥ Max. Voltage Output

Frequency (n013)

> Mid. Output Frequency

(n014)

≥ Min. Output Frequency

n001 Setting Constant That Can Be

Set

Constant That Can Be Refer-

enced

0 n001 n001 to n179

n001 to n049

n001 to n079

n001 to n119

n001 to n179

5 Not used

6 Fault history cleared

7 to 11 Not used

12 Initialize

Initialize (3-wire sequence)

NOTE