Instruction manual

ManualsBrandsYASKAWA ManualsConsumer electronicsVarispeed-606PC3

6. Operating with DeviceNet Communications

117

 MEMOBUS I/O Instance Error Table

The following errors can occur when using the MEMOBUS I/O

Instance to set or reference Inverter constants.

1FFF Vendor spe-

cific error

• Attempted to

change an

Inverter con-

stant that can-

not be changed

while the

Inverter is run-

ning.

• Attempted to

change an

Inverter con-

stant to a value

outside of the

setting range.

• Stop the

Inverter.

• Specify a value

that is within

the setting

range.

20FF Invalid param-

eter

Attempted to

change to a data

value outside of

the setting range.

Specify a data val-

ue that is within

the setting range.

Error

Code

Contents Cause

01 Hex Function

code error

A function code other than 00 Hex, 03

Hex, or 10 Hex was sent from the mas-

ter.

02 Hex Improper

register

number

• No register number has been regis-

tered to specify the register to be

accessed.

• ENTER command 0900H was exe-

cuted for a write-only register.

Error

Code

Contents Cause Corrective Action