Instruction manual

ManualsBrandsYASKAWA ManualsConsumer electronicsVarispeed-606PC3

106

01 07 Running

1

Indicates the

Inverter’s operat-

ing status.

00: Stopped, oper-

ating in reverse, or

applying DC injec-

tion braking (Re-

verse RUN

command ON).

01: Operating for-

ward or applying

DC injection brak-

ing (Reverse RUN

command OFF).

--- 00 OK --- Byte

08 Running

2

Indicates the

Inverter’s operat-

ing status.

00: Stopped, oper-

ating forward, or

applying DC injec-

tion braking (Re-

verse RUN

command OFF).

01: Operating in

reverse or apply-

ing DC injection

braking (Reverse

RUN command

ON).

--- 00 OK --- Byte

09 Ready Indicates the

Inverter’s prepara-

tion status.

00: Fault detected

or initializing.

01: Preparations

for operation com-

pleted.

--- 00 OK --- Byte

0A Faulted Indicates that the

Inverter detected

a fault.

00: Normal

01: Fault detected.

--- 00 OK --- Byte

0B Warning Indicates that the

Inverter detected

a warning.

00: Normal

01: Warning de-

tected.

--- 00 OK --- Byte

0C Fault

Reset

Resets the

Inverter from fault

status.

00: ---

01: Reset fault.

00,01 00 OK OK Byte

0D Fault

Code

The fault code in-

dicates which fault

was detected by

the Inverter. (See

note 3.)

--- 0000 OK --- Word

In-

stance

At-

tribute

Name Contents Setting

Range

Factory Set-

ting (Hex)

Read Write Size