Specifications

13/201
2.2.2 Personal Computer Settings
Set the settings related to Ethernet transmissions, to the personal computer with the software installed.
■Hardware settings
Before using the MOTOCOM32, connect the Ethernet board to the personal computer and check if
the Ethernet board operates correctly.
For connection methods, refer to the manual for the Ethernet board used.
■Windows Network settings
To communicate via the Ethernet, set the settings related to the Windows network. Click the [Start]
button in the task bar and select [Setting]. Double-click the “Network” icon from [Control Panel].
The [Select Network Component Type] Dialog box appears.
(The example below is based on Windows95.)
(1) Click the [Add] button. The [Select Network Component Type] dialog box appears.
(2) Select [Adapter] from the list and click the [Add] button to set the Ethernet board for adapter. Choose
the network adapter that is added to the personal computer as mentioned in “Hardware setting.”
Fig 2.3 Selecting Adapter
(3) Select the [Protocol] from the list and click the [Add] button, to set protocol.
Fig 2.4 Selecting Protocol
The [Select Network Protocol] dialog box appears.