Operator`s manual

86
/
91
26.2 Description of Tool Bars
26.2.1 Main Tool Bar
Button
Function Selection
Creates a new ladder program file in default. [File] - [New]
Opens an existing ladder program. [File] - [Open]
Overwrites and saves a ladder program in which
compiling after editing is completed successfully. To
save a ladder program that is being edited and
cannot be compiled, select [File] - [Save As Rough
Draft.].
[File] - [Save]
Deletes the ladder diagram information of the
selected line.
[Edit] - [Cut Rung]
Copies the ladder diagram information of the
selected line.
[Edit] - [Copy Rung]
Pastes the contents of [Cut Rung] or [Copy Rung] on
the selected line. The ladder information that
existed before pasting disappears.
[Edit] - [Paste Rung]
Inserts the contents of [Cut Rung] or [Copy Rung]
into the selected line. All the lines after the
selected line are moved backward.
[Edit] - [Insert Cut¥Copied
Rung]
Returns the edited contents to the previous state. [Edit] - [Undo]
Retries the operation that was returned to by
[Return].
[Edit] - [Redo]
Inserts a new line after the selected line. [Edit] - [Insert new Rung]
Overwrites and updates the currently edited ladder
diagram information for the currently displayed line.
[Edit] - [Save Current
Rung] – [Overwrite]
Inserts the currently edited ladder diagram
information to the next line of the currently
displayed line.
[Edit] - [Save Current
Rung] – [Insert]
Compiles the currently displayed ladder program.
Compiling checks for mistakes in the edited ladder
program (such as overlapped relay Nos.,
measurement of processing time).
[Tool] - [Check the Ladder]
Displays the list of lines which uses specified set
values (relay Nos., register Nos., constants).
[Tool] - [Instruction Use
Table]
Displays the header information of the ladder
program in operation.
[Edit] - [Header
Information]
Displays the message information of the ladder
program in operation.
[Edit] - [Alarms and
&Messages]
Changes a ladder to be edited into a ladder in the
system section. Only users at the manager level
can edit the ladders in the system section.
[Option] - [Current Ladder
Section] - [System Section]
Changes a ladder to be edited into a ladder in the
user section.
[Option] - [Current Ladder
Section] - [User Section]
Displays the contents of HELP. [Help] - [Help Topics]