Operator`s manual

82
/
91
Menu Function
Undo
Returns the edited contents to the previous state.
Redo
Retries the operation that was returned to by
[Return] operation.
Insert New Rung
Inserts a new line after the selected line.
Cut Rung
Deletes the ladder diagram information of the
selected line.
Copy Rung
Copies the ladder diagram information of the selected
line.
Paste Rung
Pastes the contents of [Cut Rang] or [Copy Rang] on
the selected line. The ladder information that
existed before pasting disappears.
Insert Cut
Copied Rung
Inserts the contents of [Cut Rang] or [Copy Rang] into
the selected line. All the lines after the selected line
are moved backward.
Save Current Rung
—
Overwrite
Overwrites and updates the ladder diagram
information on the currently edited ladder diagram
information for the currently displayed line.
Insert
Inserts the currently edited ladder diagram
information to the next line of the currently displayed
line.
Clear Current Rung
Clears the ladder diagram information of the
currently displayed line.
Header Information
Displays the header information of the ladder
program in operation.
Alarms and Messages
Displays the message information of the ladder
program in operation.
Relay Labels and Rung Comments
Displays the relay name list.
Register Labels
Displays the register name list.
Find Input Relays, Registers or
Constants
—
Specify Parameter
Searches for relay Nos., register Nos. or set constants.
Backward
Searches for set values in the direction of the smaller
line No..
Forward
Searches for set values in the direction of the greater
line Nos..
Find Output Relays
Searches for relay Nos. used in the OUT terminal.
Go to Rung
Searches for the specified line and jumps there.
Go to First Rung
Moves to the first line.
Go to Last Rung
Moves to the last line.
View
—
Main Toolbar
Switches between display/non-display of the tool bar.