Operator`s manual

61
/
91
[Relay, Register or Constant] (Reference Data) List Box
The list contains the set values to be searched for. Normally, there is
only one item. However, since more than two items may appear
occasionally, select one.
[Instruction Type] Tree
The tree consists of ladder parts. Selecting this tree item can limit the
line Nos. displayed in the [Rang Containing Item] matrix.
For example, selecting “STR” item displays only the line Nos. with the set
values for “STR” parts.
[Rang Containing Item] Matrix
Displays the line Nos. referring to the set values selected in the [Relay,
Register or Constant] (reference data) list box. The line No. appears in
red if the detected line No. is within the system ladder area, and in blue if
it is within the user ladder area.
[Application]
Set values in the ladder parts may be referenced by several other lines. In such
cases, this function is useful to analyze where it is used or to know how it is used
in other lines.
21.1.1 Line Jump from [Instruction Use Table] Dialog Box
The line jump from [Instruction Use Table] dialog box function can jump to an
arbitrary line from the [Instruction Use Table] dialog box. As shown in Fig.
21-3, double-clicking the desired line No. on the [Rang Containing Item] matrix
moves to the targeted line.