Operator`s manual

60
/
91
21 CROSS REFERENCE FUNCTION
21.1 Ladder Parts Set Value and Reference Line List Display Function
The ladder parts set value and reference line list display function displays on which
line and for which ladder parts the specified set values are used.
[How to Operate]
1. Select [Tools] – [Instruction Use Table]. The dialog box shown in Fig. 21-1
appears.
Fig. 21-1 [Relay, Register or Constant] Dialog Box
2. After inputting the targeted set value type and the value, click the [OK]
button. The [Instruction Use Table] dialog box appears.
Fig. 21-2 [Instruction Use Table] Dialog Box