Operator`s manual

58
/
91
20.2.1 Previous/Next Search Jump
Previous search and next search functions can be used for searching for parts set
values only.
[How to Operate]
For a backward search, select [Edit] – [Find Input Relays, Registers or
Constants] – [Backward], or select
(brown) from the search jump tool
bar (refer to “26.2.3 Search Jump Tool Bar”). For forward search, select
[Edit] – [Find Input Relays, Registers or Constants] – [Forward], or
select
(brown) from the search jump tool bar.
Backward
Backward search is a function to search for the set value in front of the
current line (in the direction of smaller line No.).
Forward
Forward search is a function to search for the set value behind the
current line (in the direction of greater line No.).
Unless new set values are entered by pressing [Edit] - [Find Input Relays,
Registers or Constants]-[Backward search] or [Forward search], the set values to
be searched for do not change.
This function can be used to easily know where and how the set values are used.
20.3 OUT Parts Relay No. Search Jump
The OUT parts relay No. search jump function searches only for the relay No. set to
the OUT parts of the ladder parts and jumps there. Other ladder parts can not be
searched for.
[How to Operate]
1. Select [Edit] – [Find Output Relays]. Or select
from the search jump tool
bar (refer to “26.2.3 Search Jump Tool Bar”).
2. When the dialog box shown in Fig. 20-3 appears, input the relay No. to be
searched for and click the [OK] button.