Operator`s manual

57
/
91
20 LINE JUMP FUNCTION
The line jump function searches for and jumps to the line with the keyword.
20.1 Line No. Search Jump
This function jumps to the specified line No..
[How to Operate]
1. Select [Edit] – [Go to Rung.], or select
(black) from the search jump tool
bar (refer to “26.2.3 Search Jump Tool Bar”).
When the dialog box shown in Fig. 20-1 appears, enter the line No. to jump
and click the [OK] button.
Fig. 20-1 “Enter a Rung No. ” Dialog Box
20.2 Parts Set Value Search Jump
This function searches for values such as relay Nos., register Nos., and constants set
to the ladder parts, and then jumps to the line with the set values.
[How to Operate]
1. Select [Edit] – [Find Input Relays, Registers or Constants] – [Specify
Paramaeter], or select
(brown) from the search jump tool bar (refer to
“26.2.3 Search Jump Tool Bar”).
2. When the dialog shown in Fig. 20-2 appears, enter the type of the value and
the set value to be searched and click the [OK] button.
Fig. 20-2 “Relay, Register or Constant” Dialog Box