Operator`s manual

52
/
91
18.2.2 Reading Name File Automatically (Without Name File)
If the desired name file is not available when automatically reading the name
file, Ladder Editor 32NX performs the operation in the following manner.
1. Selects a file suitable for the desired ladder program from the name template
file prepared in default.
2. Copies the selected template file to the same directory as the ladder program
file.
3. Reads in the copied template file as a name file.
In this case, Ladder Edit 32NX refers to the ladder names to be read in to select
the template file.
However, when the user changes the ladder name of the ladder program file,
Ladder Editor 32NX may not find any file name that coincides with the ladder
name template file. In such a case, the [Select name template] dialog box (Fig.
18-1) appears.
Fig. 18-1 [Select Name Template] Dialog Box
Select the template suitable for the desired ladder program. Clicking the
[Cancel] button stops the automatic reading of the name file.
The following shows the simple flowchart of the automatic reading.