Operator`s manual

43
/
91
13.4 Printing Relay No. Use State
Print the relay No. use state in the “matrix” display.
[How to Operate]
Select [File] – [Print] – [Relay State Table].
Relay Nos. for the system section and user section appear together, indicated by the
following symbols.
S: Relay Nos. used in a system section
U: Relay Nos. used in a user section
B: Relay Nos. used in both system and user sections
A relay No. in a matrix is regarded as YYYYYX when the vertical is “YYYYY” and
the horizontal axis value is “X”.
Relay No. matrix
Printing range
Used in a user
section
Used in both user and
system section
Used in a system
section
Fig. 13-4 Printing Relay No. Use State